Puritan Bennett Companion T Specifications download pdf (Page 11)

701641 Rev. E 9

HOW TO USE YOUR HELiOS OXYGEN SYSTEM

Filling the Portable Unit

Fill the HELiOS Portable unit from the Reservoir as follows:

1. Check the contents indicator on the Reservoir by pressing the blue button to

ensure there is enough liquid oxygen for filling purposes. If the yellow light

comes on, you may proceed with filling the Portable, but you should inform

your oxygen supply company.

2. Using a dry cloth that is clean, wipe the male fill connector on the Reservoir

and female fill connector on the Portable.

3. Position the HELiOS Portable over the recessed area in the top of the

Reservoir. (Figure 1).

WARNING

• Using a dry cloth that is clean, wipe the fill connector

dry on both the Reservoir and Portable units before

filling to prevent freezing and possible equipment

failure.

• Extreme cold hazard. Do not press or disturb the

plastic poppet in the center of the fill connector on

the Reservoir. This will cause a release of liquid oxygen

from the fill connector.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

No comments

Puritan Bennett Companion T Specifications Page 11