Puritan Bennett Companion T User Manual download pdf (Page 10)

The following step-by-step instructions will help you

operate your stationary reservoir. If your physician

has specified a humidifier with your stationary

reservoir, go to step 2.

Step 1

: Attach a nipple valve to the reservoir outlet

tube and attach the oxygen tubing to the nipple outlet.

Step 2:

If recommended, attach a filled humidifier

bottle.

• Center the threaded cap on the humidifier bottle

under the threaded outlet tube on the reservoir.

• Turn the cap on the humidifier bottle until it is

tightly screwed onto the outlet tube.

• Attach oxygen tubing to the nipple outlet on

the humidifier bottle lid.

Note:

Humidifier bottles are generally

recommended only for patients using flow rates

greater than four liters per minute.

Step 3:

Adjust the oxygen flow rate by turning

the liter control knob until the flow is at the

prescribed number.

Rotary Flow Control

Turn the dial until the prescribed liter number

appears and the switch clicks into position.

Step 4:

Fit the nasal cannula or the oxygen mask

to your face so it is comfortable. Follow the

instructions below for either the nasal cannula

or oxygen mask, depending on which one your

physician has prescribed.

Operating

Your Stationary

Reservoir

Adjusting oxygen flow rate using

a rotary flow control dial

Job Name: 17060_RES-2002 Liquid Oxygen

PDF Page: RES-2002.p10.pdf

Date: 11-02-22

Time: 16:28:25

Name: ____________________________

OK to proceed

Make corrections and proceed

Make corrections and show another proof

Signed: ___________________ Date: _________

Las Vegas Commercial Plant

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments

Puritan Bennett Companion T User Manual Page 10

Comments to this Manuals

Related products and manuals for Oxygen Equipment Puritan Bennett Companion T