Puritan Bennett KnightStar 330 User Manual download pdf (Page 43)

How to operate the

KnightStar 330

Y-500009-00 Rev. J (6/06) KnightStar 330 User’s Manual

3-11

To run the

KnightStar 330

using the external battery:

1. Turn the

KnightStar 330

off and disconnect the AC

power cord from the back of the device.

2. Connect one end of the appropriate cable to the

battery or automobile cigarette lighter/power port and

the other end to the external battery connector at the

back of the

KnightStar 330

(refer to Figure 1-2 and Table

1-2 on page 1-12).

3. Turn the

KnightStar 330

on.

To switch back to AC power:

1. Turn the

KnightStar 330

off and disconnect the battery

cable from the back of the device.

2. Connect the AC power cord to the

KnightStar 330

and

plug into a wall outlet.

3. Turn the

KnightStar 330

on.

3.5 How to clean the KnightStar 330

It is important to clean all of the equipment regularly. Do

not use any cleaning method other than described here.

3.5.1 How to clean the breathing circuit

Before you use the breathing circuit for the first time (and

at least three times per week thereafter):

1. Plug the ends of the patient pressure line (small tube

running along the length of the circuit) with the plugs

that came with the circuit.

2. Wash the circuit with warm, soapy, distilled water.

Connect the KnightStar 330 to only one power

source at a time; external battery or AC power.

Damage to the device can result if connected to

both power sources at the same time.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 67 68

Comments to this Manuals

No comments

Puritan Bennett KnightStar 330 User Manual Page 43

Comments to this Manuals

Related products and manuals for Household fans Puritan Bennett KnightStar 330